Top 10 Best Turning Inserts in 2022

For this article, we’ve put together a collection of the Best Turning Inserts from Amazon. To make your choice easier, we’ve compiled some key features of each of these Turning Inserts.

As an affiliate, we may earn some commission when you make any purchase from links on this page.

Best Turning Inserts

1

ASZLBYM 21PCS 1/2"/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

ASZLBYM 21PCS 1/2'/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

Editorial Scoring Index

  • Quality: 96 /100
  • Performance: 82 /100
  • Features: 95 /100
  • Value: 70 /100

Highlighted Features:

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches.
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc.
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability.
2

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

Editorial Scoring Index

  • Quality: 73 /100
  • Performance: 89 /100
  • Features: 82 /100
  • Value: 80 /100

Highlighted Features:

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel; The cemented carbide material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; Applicable machine tool is lathe; Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm; Due to the difference between different monitors, the picture may not reflect the actual color of the item
3

Michigan Drill TT Solid Carbide Turning Insert, TiN Coated, TT Shape, TT-322 TC, 0.032" Nose Radius (Pack of 10)

Michigan Drill TT Solid Carbide Turning Insert, TiN Coated, TT Shape, TT-322 TC, 0.032' Nose Radius (Pack of 10)

Editorial Scoring Index

  • Quality: 99 /100
  • Performance: 95 /100
  • Features: 79 /100
  • Value: 80 /100

Highlighted Features:

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • 11 degrees diamond - 5 degrees positive lapped with hole and cast chipbreaker
4

3PCS 5/8" CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

3PCS 5/8' CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

Editorial Scoring Index

  • Quality: 98 /100
  • Performance: 93 /100
  • Features: 100 /100
  • Value: 79 /100

Highlighted Features:

  • ★Package Included:3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ) ; 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331) ; 3 sets wrenches.
  • ★Shank Diameter (length×width): (16*16mm ≈ 5/8"x5/8" ) ; Overall Length:(100mm ≈ 3-7/8" ) ,Cutting Direction:right hand.
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size.
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability.
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder)
Sale5

OSCARBIDE Carbide Turning Inserts CCMT060204(CCMT21.51) CCMT Insert Mutilayer Coated CNC Lathe Inserts for Lathe Turning Tool Holder Cut Off Tools, 10 Pieces

OSCARBIDE Carbide Turning Inserts CCMT060204(CCMT21.51) CCMT Insert Mutilayer Coated CNC Lathe Inserts for Lathe Turning Tool Holder Cut Off Tools, 10 Pieces

Editorial Scoring Index

  • Quality: 88 /100
  • Performance: 77 /100
  • Features: 80 /100
  • Value: 94 /100

Highlighted Features:

  • Size: CCMT 21.51(CCMT060204), 3/32" Thick,1/64" Radius.
  • Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance
  • Designed for Steel, cast iron and non-ferrous materials
  • Used for turning and finishing on a wide range of materials
  • 80 degrees diamond single sided insert with molded chipbreaker, 10pcs/pack
6

Zouzmin RCMT10T3M0 10pcs Carbide indexable Turning Insert with 5/8" SRDCN1616H10 Lathe Turning Tool Holder for Steel,Stainless Steel (RCMT10T3M0 +SRDCN1616H10)

Zouzmin RCMT10T3M0 10pcs Carbide indexable Turning Insert with 5/8' SRDCN1616H10 Lathe Turning Tool Holder for Steel,Stainless Steel (RCMT10T3M0 +SRDCN1616H10)

Editorial Scoring Index

  • Quality: 85 /100
  • Performance: 73 /100
  • Features: 77 /100
  • Value: 87 /100

Highlighted Features:

  • With thick TICN and thick AL2O3 coating, it has strong plastic deformation resistance and edge strength, and is the general choice for steel from finishing to roughing.
  • It has stable performance under high removal rate cutting parameters and harsh working conditions, and can achieve more green and environmentally friendly dry cutting. Under the same cutting conditions, the cutting speed can be increased.
  • Suitable for machining steel
  • About the holders:solid hard with good cushioning effect,low friction coefficient,material of 42CrMo
  • Package: 10pcs insert(1box)+1 boring bar(1box).
7

4 Piece 1/2" Mini Lathe Indexable Carbide Turning Tool Holder Bit Set With 4PCS DCMT21.51 Indexable Carbide Turning Insert

4 Piece 1/2' Mini Lathe Indexable Carbide Turning Tool Holder Bit Set With 4PCS DCMT21.51 Indexable Carbide Turning Insert

Editorial Scoring Index

  • Quality: 99 /100
  • Performance: 80 /100
  • Features: 100 /100
  • Value: 92 /100

Highlighted Features:

  • Material : Hardened Steel (turning holder) + Carbide (turning insert)
  • Package :1PC S12M-SDUCR07 + 1PC SDNCN1212H07 + 1PC SDJCR1212H07 + 1PC SDJCL1212H07 + 4PC DCMT21.51 Inserts + 4PC T8 Wrench
  • Black oxided smooth finish on each turning tool holder style and shank size.
  • Each tool holder comes with a carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.
  • Blades exquisite workmanship, high strength, high toughness, stable and durable. If you need more dcmt21.51 insert ,you can search for Asin: B07GSW3VSG
8

Tungsten Carbide Inserts Wood Lathe Turning Tools, Wood Lathe Tools Set Include 11mm Square, 30x10mm Diamond with Sharp Point,12mm and 8.9mm Round Shape and Screws-16Pcs

Tungsten Carbide Inserts Wood Lathe Turning Tools, Wood Lathe Tools Set Include 11mm Square, 30x10mm Diamond with Sharp Point,12mm and 8.9mm Round Shape and Screws-16Pcs

Editorial Scoring Index

  • Quality: 74 /100
  • Performance: 87 /100
  • Features: 91 /100
  • Value: 81 /100

Highlighted Features:

  • 4 Models Carbide Inserts Satisfy All Your Demands: Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round(Ø12mm*2.5mm) and(Ø8.9mm*1.85mm),Supplied with 8pcs Screws. Carbide Inserts replacement tool sets can do the roughing and finishing cutting, it's suitable for both professional carpenters and beginners.
  • Made of solid tungsten carbide, high strength and hardness, own longer use life, sharp and durable. Provides the best combination of sharpness and durability. It is polished to a mirror finish for smoother cutting and longer tool life. High-performance industrial quality tool.
  • Perfect for finish the curved, concave surfaces, hollower jobs and for general wood turning applications. This combination will give you a replacement carbide inserts for most woodturning tools.
  • The tungsten carbide inserts are considerate combination sets for meeting the requirements of rough machining and finishing combination, compatible with wood turning tools and other related accessories, nicely matched, easy to replace wood jointers and planers.
  • Package:8pcs carbide inserts and 8pcs Screws in a plastic box. Providing you a better experience and durable use. If you have any problems please feel free to contact us, we will try our best and let you satisfaction.
9

3PCS 5/8" Metal Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 With 3pcs wnmg432, cnmg432, tnmg332 Indexable Carbide Inserts

3PCS 5/8' Metal Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 With 3pcs wnmg432, cnmg432, tnmg332 Indexable Carbide Inserts

Editorial Scoring Index

  • Quality: 93 /100
  • Performance: 93 /100
  • Features: 93 /100
  • Value: 99 /100

Highlighted Features:

  • Model:MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 .
  • Package Included : 3pcs holders + 3 sets wrenches + 3pcs carbide inserts + 3pcs shims .
  • Shank Diameter (length×width): ( 5/8"x5/8" inch / 16*16mm) ; Overall Length:( 3-7/8" inch / 100mm) ,Cutting Direction:right hand .
  • Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade.
  • Turning inserts exquisite workmanship, high strength, high toughness, stable and durable.If you need more matching insert or 5/8" left and right turning holder set, you can search for B07Q1117MJ (inserts) or B07B8XNH98 ,B076WTPBVK(holder)
10

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

Editorial Scoring Index

  • Quality: 91 /100
  • Performance: 73 /100
  • Features: 94 /100
  • Value: 91 /100

Highlighted Features:

  • 7 pc Indexable Carbide Turning Tool Set; Shank size: 1/2 inch x 1/2 inch; Overall Length: 4"
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M); SER0500J11 (insert: 11ER A60); SWGCR08-2J (insert: WCMT22); SCLCR08-2J (insert: CCMT21.5); SCLCL08-2J (insert: CCMT21.5); SDNCN08-2J (insert: DCMT21.5); SDJCR08-2J (insert: DCMT21.5)
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size.
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.
  • Insert screw and wrench included; 10 extra carbide inserts included

Last update on 2022-09-30 / Affiliate links / Images from Amazon Product Advertising API

Best Turning Inserts Comparison Table

# Product Name Performance Popularity Value Our Rating
1 ASZLBYM 21PCS 1/2"/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning...
9.8
8.9
9.1
2 33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 +...
9.7
9
9.8
3 Michigan Drill TT Solid Carbide Turning Insert, TiN Coated, TT Shape, TT-322 TC, 0.032" Nose Radius...
9.3
9.8
9.3
4 3PCS 5/8" CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 +...
9.1
9.3
8.9
5 OSCARBIDE Carbide Turning Inserts CCMT060204(CCMT21.51) CCMT Insert Mutilayer Coated CNC Lathe...
9
9.2
9.4
6 Zouzmin RCMT10T3M0 10pcs Carbide indexable Turning Insert with 5/8" SRDCN1616H10 Lathe Turning Tool...
9.2
8.9
9.4
7 4 Piece 1/2" Mini Lathe Indexable Carbide Turning Tool Holder Bit Set With 4PCS DCMT21.51 Indexable...
9.4
9.6
9.7
8 Tungsten Carbide Inserts Wood Lathe Turning Tools, Wood Lathe Tools Set Include 11mm Square, 30x10mm...
9.8
9.2
9
9 3PCS 5/8" Metal Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 +...
9.2
9.7
9.8
10 Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra...
9.5
9.6
9.4

Last update on 2022-09-30 / Affiliate links / Images from Amazon Product Advertising API

We hope you enjoyed our listing of the Best Turning Inserts and have already found your desired product. If you think we’ve missed any specific model, feel free to let us know by dropping a comment below.

Leave a Comment