Top 10 Best Hougen Cutting Tools in 2022

For this article, we’ve put together a collection of the Best Hougen Cutting Tools from Amazon. To make your choice easier, we’ve compiled some key features of each of these Hougen Cutting Tools.

As an affiliate, we may earn some commission when you make any purchase from links on this page.

Best Hougen Cutting Tools

Sale1

Hougen 11075 RotaCut High Speed Steel Cutter Kit 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4", 1/4" Cutting Depth, Bright Finish, 3/8" Shank

Hougen 11075 RotaCut High Speed Steel Cutter Kit 5/16”, 3/8', 7/16”, 1/2', 9/16”, 5/8, 3/4', 1/4' Cutting Depth, Bright Finish, 3/8' Shank

Editorial Scoring Index

  • Quality: 73 /100
  • Performance: 100 /100
  • Features: 88 /100
  • Value: 89 /100

Highlighted Features:

  • ✔️Hougen Sheet Metal Hole Cutters are Perfect For: Electrical; Pipe and Tubing; Conduit Work; Sheet Metal fabrication; Maintenance Installations; HVAC / PHCC; Automotive Aftermarket and many other industries
  • ✔️Holemaking – faster and easier than with conventional twist drills andhole saws – in Sheet Metal; Plate Materials; Hardened Steel, Mild Steel; Stainless Steel and Plastics; For use in hand held drills with either 3/8" or 1/2" diameter chucks, or air feed drill spindles for production work.
  • ✔️Hougen Sheet Metal Hole Cutters are not hole saws - they’re precision ground and heat treated high-performance cutting tools that produce clean, burr-free, round holes without ripping, tearing, or deforming the surrounding material. They can produce holes up to 3x faster than hole saws and last 10x longer.
  • ✔️For use in hand held drills with either 3/8" or 1/2" diameter chucks, or air feed drill spindles for production work.
  • ✔️Hougen’s Sheet Metal Hole Cutters allow you to maximize feed rates and distribute the cutting load evenly over many cutting edges, rather than just two edges as a twist drill. Also, by cutting around the hole, Hougen Sheet Metal Hole Cutters convert a smaller area to chips, leaving the center as a slug, requiring less horsepower and thrust than twist drills.
Sale2

Hougen 11085 RotaCut Hole Cutter Master Kit - Fractional 21 Piece, 1/4 to 3/4" Cutter Diameter, 1/4" Cutting Depth

Hougen 11085 RotaCut Hole Cutter Master Kit - Fractional 21 Piece, 1/4 to 3/4' Cutter Diameter, 1/4' Cutting Depth

Editorial Scoring Index

  • Quality: 95 /100
  • Performance: 98 /100
  • Features: 98 /100
  • Value: 97 /100

Highlighted Features:

  • Used in hand-held electric drills and in drill presses, Can drill holes 1/4” or 1/2” thick depending on diameter
  • Annular design cuts the periphery of the hole, Drills holes 3 times faster than twist drills or hole saws
  • Virtually burr-free holes, Doesn't deform surrounding material, while deburring holes
  • Packaged in a sturdy plastic storage case, Material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number of Flats: 3
  • Includes: (1) Arbor; (1) Center Punch; (3) Pilots & (16) cutters - 1/4" 9/32" 5/16" 11/32" 3/8" 13/32" 7/16" 29/64" 15/32" 1/2" 17/32" 9/16" 5/8" 11/16" 23/32" 3/4" MADE IN U.S.A.
Sale3

Hougen 14005 11 Piece Electrician and Fabricators Kit 7/8 to 2-1/2" - 1/8" Cutting Depth High Speed Steel for Sheet Metal Holemaking

Hougen 14005 11 Piece Electrician and Fabricators Kit 7/8 to 2-1/2' - 1/8' Cutting Depth High Speed Steel for Sheet Metal Holemaking

Editorial Scoring Index

  • Quality: 82 /100
  • Performance: 74 /100
  • Features: 85 /100
  • Value: 85 /100

Highlighted Features:

  • The Holcutters, are not hole saws. They're precision ground, heat treated tools that easily cut thru the stock rather than ripping, tearing, and pushing thru as do typical hole saws.
  • They can produce holes three times faster and cleaner than hole saws in sheet metal and have dramatically extend tool life, too.
  • All sizes have a "shoulder" to prevent plunge-thru, which is especially useful when drilling into live electrical boxes. Material Application Aluminum; Mild Steel; Stainless Steel; Steel
  • Cutter Diameter (Inch) 7/8; 1-1/8; 1-3/8; 1-3/4; 2; 2-1/2 - Cutter Material High Speed Steel
  • Set Includes (1) Arbor; (1) Hex Washer; (1) Plastic Case; (6) HSS Hole Cutters; Instructions; Pilots
4

Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon

Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon

Editorial Scoring Index

  • Quality: 80 /100
  • Performance: 79 /100
  • Features: 75 /100
  • Value: 99 /100

Highlighted Features:

  • RotaMagic Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water
  • RotaMagic extends tool life and improves cutter performance, Use with ferrous or non-ferrous materials
  • Will improve surface finish and reduce heat build up when drilling
  • Biodegradable & Non-Toxic
  • Makes 11 Gallons after mixing
5

Hougen 11078 RotaCut Large Diameter Hole Cutter Kit - Fractional, 9 Piece 7/8 to 1-1/2" Cutter Diameter 1/2" Cutting Depth

Hougen 11078 RotaCut Large Diameter Hole Cutter Kit - Fractional, 9 Piece 7/8 to 1-1/2' Cutter Diameter 1/2' Cutting Depth

Editorial Scoring Index

  • Quality: 90 /100
  • Performance: 89 /100
  • Features: 85 /100
  • Value: 88 /100

Highlighted Features:

  • Used in hand-held electric drills and in drill presses, Can drill holes 1/4” or 1/2” thick depending on diameter
  • Annular design cuts the periphery of the hole, Drills holes 3 times faster than twist drills or hole saws
  • Virtually burr-free holes, Doesn't deform surrounding material, while deburring holes
  • Packaged in a sturdy plastic storage case, Material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number of Flats: 3
  • Includes:(6) Annular Cutters; 1/2" Arbor Assembly; Center Punch; Pilot - 7/8; 1; 1-1/8; 1-1/4; 1-3/8; 1-1/2 MADE IN U.S.A.
6

Hougen 11745 Slick Stik Lube 16 oz for optimum annular cutter tool life and cutter efficiency

Hougen 11745 Slick Stik Lube 16 oz for optimum annular cutter tool life and cutter efficiency

Editorial Scoring Index

  • Quality: 100 /100
  • Performance: 76 /100
  • Features: 84 /100
  • Value: 82 /100

Highlighted Features:

  • Hougen Slick-Stik Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage.
  • Easy Application and Better Adhesion to the Tool Than Oils and Other Standard Lubricants
  • Specially Formulated Stick Lubricant For Annular Cutting Tools, Use with ferrous and non-ferrous materials
  • Can be used with all annular cutters including Hougen Cutters for horizontal or overhead drilling.
  • Environmentally Safe, No Messy Clean-up, Improves Hole Finish, Cleaner and Faster Cuts, Reduces Friction, Extends Tool Life
7

Hougen 17802 RotaLoc Plus Fabricator's Kit 1/2", 5/8" & 3/4" (for HMD130 only)

Hougen 17802 RotaLoc Plus Fabricator's Kit 1/2', 5/8' & 3/4' (for HMD130 only)

Editorial Scoring Index

  • Quality: 77 /100
  • Performance: 96 /100
  • Features: 100 /100
  • Value: 81 /100

Highlighted Features:

8

Hougen 12001 12,000 Series Annular Cutter Kit 9/16, 11/16, 13/16, 15/16, 1-1/16" 1-Inch Depth of Cut 3/4-Inch Weldon Shank For Magnetic Drills

Hougen 12001 12,000 Series Annular Cutter Kit 9/16, 11/16, 13/16, 15/16, 1-1/16' 1-Inch Depth of Cut 3/4-Inch Weldon Shank For Magnetic Drills

Editorial Scoring Index

  • Quality: 97 /100
  • Performance: 74 /100
  • Features: 95 /100
  • Value: 70 /100

Highlighted Features:

  • ✔️ TWO FLATS FOR CUTTER MOUNTING — This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems. The Original Mag Drill Annular Cutter From Which All Others Are Measured.
  • ✔️ GROUNDED & FULLY FLUTED — Provides better chip evacuation, requires less HP and offers better performance in deeper holes.
  • ✔️ O.D. MARGINS — Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish.
  • ✔️ PATENTED HOUGEN-EDGE GEOMETRY — Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles.
  • ✔️ I.D. TAPER — Relief area between slug and cutter. Reduces horsepower and improves slug ejection.
9

Hougen 12002 12,000 Series Annular Cutter Kit 9/16, 11/16, 13/16, 15/16, 1-1/16" 2-Inch Depth of Cut 3/4-Inch Weldon Shank For Magnetic Drills

Hougen 12002 12,000 Series Annular Cutter Kit 9/16, 11/16, 13/16, 15/16, 1-1/16' 2-Inch Depth of Cut 3/4-Inch Weldon Shank For Magnetic Drills

Editorial Scoring Index

  • Quality: 71 /100
  • Performance: 77 /100
  • Features: 99 /100
  • Value: 91 /100

Highlighted Features:

  • ✔️ TWO FLATS FOR CUTTER MOUNTING — This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems. The Original Mag Drill Annular Cutter From Which All Others Are Measured
  • ✔️ GROUNDED & FULLY FLUTED — Provides better chip evacuation, requires less HP and offers better performance in deeper holes
  • ✔️ O.D. MARGINS — Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish.
  • ✔️ PATENTED HOUGEN-EDGE GEOMETRY — Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles.
  • ✔️ I.D. TAPER — Relief area between slug and cutter. Reduces horsepower and improves slug ejection
10

Hougen 12120 5/8 Inch Diameter x 1 Inch Depth of Cut 12,000 Series High Speed Steel Annular Cutter 3/4 Inch Weldon Shank for Magnetic Drills

Hougen 12120 5/8 Inch Diameter x 1 Inch Depth of Cut 12,000 Series High Speed Steel Annular Cutter 3/4 Inch Weldon Shank for Magnetic Drills

Editorial Scoring Index

  • Quality: 82 /100
  • Performance: 98 /100
  • Features: 88 /100
  • Value: 88 /100

Highlighted Features:

  • ✔️ TWO FLATS FOR CUTTER MOUNTING - This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems.
  • ✔️ GROUNDED & FULLY FLUTED - Provides better chip evacuation, requires less HP and offers better performance in deeper holes
  • ✔️ O.D. MARGINS - Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish.
  • ✔️ PATENTED HOUGEN-EDGE GEOMETRY - Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles.
  • ✔️ I.D. TAPER - Relief area between slug and cutter. Reduces horsepower and improves slug ejection. PILOT IS NOT INCLUDED USE WITH PILOT HOUGEN 10527.

Last update on 2022-09-23 / Affiliate links / Images from Amazon Product Advertising API

Best Hougen Cutting Tools Comparison Table

# Product Name Performance Popularity Value Our Rating
1 Hougen 11075 RotaCut High Speed Steel Cutter Kit 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4",...
9.1
8.8
9.3
2 Hougen 11085 RotaCut Hole Cutter Master Kit - Fractional 21 Piece, 1/4 to 3/4" Cutter Diameter, 1/4"...
8.9
9.6
8.8
3 Hougen 14005 11 Piece Electrician and Fabricators Kit 7/8 to 2-1/2" - 1/8" Cutting Depth High Speed...
9.8
9
9.5
4 Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon
9.7
9.4
9
5 Hougen 11078 RotaCut Large Diameter Hole Cutter Kit - Fractional, 9 Piece 7/8 to 1-1/2" Cutter...
9.4
9.5
9.1
6 Hougen 11745 Slick Stik Lube 16 oz for optimum annular cutter tool life and cutter efficiency
8.9
9.1
9.5
7 Hougen 17802 RotaLoc Plus Fabricator's Kit 1/2", 5/8" & 3/4" (for HMD130 only)
9.7
9.1
9.7
8 Hougen 12001 12,000 Series Annular Cutter Kit 9/16, 11/16, 13/16, 15/16, 1-1/16" 1-Inch Depth of Cut...
9.5
9.1
9
9 Hougen 12002 12,000 Series Annular Cutter Kit 9/16, 11/16, 13/16, 15/16, 1-1/16" 2-Inch Depth of Cut...
9.7
8.9
8.9
10 Hougen 12120 5/8 Inch Diameter x 1 Inch Depth of Cut 12,000 Series High Speed Steel Annular Cutter...
9.4
9.3
9.3

Last update on 2022-09-23 / Affiliate links / Images from Amazon Product Advertising API

We hope you enjoyed our listing of the Best Hougen Cutting Tools and have already found your desired product. If you think we’ve missed any specific model, feel free to let us know by dropping a comment below.

Leave a Comment