Top 10 Best Cabinet Table Saws in 2022

For this article, we’ve put together a collection of the Best Cabinet Table Saws from Amazon. To make your choice easier, we’ve compiled some key features of each of these Cabinet Table Saws.

As an affiliate, we may earn some commission when you make any purchase from links on this page.

Best Cabinet Table Saws

1

GENERAL INTERNATIONAL Automated Tablesaw - 3 HP 1 PH Automatic Bench Saw with 52" Rail Set & Large Wood Table - 850-3-52

GENERAL INTERNATIONAL Automated Tablesaw - 3 HP 1 PH Automatic Bench Saw with 52' Rail Set & Large Wood Table - 850-3-52

Editorial Scoring Index

  • Quality: 88 /100
  • Performance: 98 /100
  • Features: 97 /100
  • Value: 95 /100

Highlighted Features:

  • AUTOMATIC CONTROL SYSTEM - Auto Fence electronic control system is connected to a programmable controller, and the input value includes saw blade angle, height and cutting width which can achieve accurate horizontal movement and blade tilt/lifting by LCD touch control.
  • POWDER COATED FINISH - Powder coated, scratch resistant, high quality reinforced steel cabinet
  • LCD TOUCH DISPLAY - Adjust electronic movement, auto tilt and blade lifting by using the LCD touch control display
  • EMERGENCY SAFETY STOP - Magnetic emergency stop safety switch to prevent unwanted or unintentional start-up.
  • RAIL SET MOUNTING - Rip fence and guide rail can be mounted on both the left and right side.
2

Powermatic PM1000, 10-Inch Table Saw, 52-Inch Rip, 1-3/4HP, 115/230V 1PH (1791001K)

Powermatic PM1000, 10-Inch Table Saw, 52-Inch Rip, 1-3/4HP, 115/230V 1PH (1791001K)

Editorial Scoring Index

  • Quality: 74 /100
  • Performance: 75 /100
  • Features: 86 /100
  • Value: 99 /100

Highlighted Features:

  • PRECISION-GROUND CAST IRON WORK SURFACE: Features a beveled edge for smoother operation.
  • POLY-V BELT DRIVE SYSTEM: Reduces vibration and maximizes efficiency.
  • MITER GAUGE PIVOTS 60° LEFT/RIGHT: Allows easy adjustment for a full range of cuts.
  • ARBOR LOCK: One-handed blade changes with minimal tools.
  • EXCLUSIVE ACCU-FENCE SYSTEM: Provides rigidity and precision.
3

Grizzly Industrial G0651-10" 3 HP 220V Heavy Duty Cabinet Table Saw

Grizzly Industrial G0651-10' 3 HP 220V Heavy Duty Cabinet Table Saw

Editorial Scoring Index

  • Quality: 91 /100
  • Performance: 92 /100
  • Features: 74 /100
  • Value: 100 /100

Highlighted Features:

  • Motor: 3 HP, 220V, single-phase
  • Amps: 13
  • Blade tilt: Left, 45°
  • Table height from floor: 34-7/8"
  • Table size with extension: 27" x 75-3/4"
4

F2 Fusion Tablesaw

F2 Fusion Tablesaw

Editorial Scoring Index

  • Quality: 81 /100
  • Performance: 76 /100
  • Features: 79 /100
  • Value: 93 /100

Highlighted Features:

  • 1. 75HP TEFC motor
  • Fusion dust collection system
  • Cabinet mounted design
  • Included tools & integrated tool storage
  • Included 10 x 60T carbide-tipped blade
  • Full cabinet body
  • Cabinet mounted arbor
  • Cast iron table & Wings
  • European hi-lo fence
  • Fusion hi-lo dust collection
5

SAWSTOP 10-Inch Professional Cabinet Saw, 3-HP, 36-Inch Professional TGlide Fence System (PCS31230-TGP236)

SAWSTOP 10-Inch Professional Cabinet Saw, 3-HP, 36-Inch Professional TGlide Fence System (PCS31230-TGP236)

Editorial Scoring Index

  • Quality: 92 /100
  • Performance: 80 /100
  • Features: 84 /100
  • Value: 75 /100

Highlighted Features:

  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap.
  • DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port.
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
6

SAWSTOP 10-Inch Professional Cabinet Saw, 1.75-HP, 52-Inch Professional TGlide Fence System (PCS175-TGP252)

SAWSTOP 10-Inch Professional Cabinet Saw, 1.75-HP, 52-Inch Professional TGlide Fence System (PCS175-TGP252)

Editorial Scoring Index

  • Quality: 82 /100
  • Performance: 90 /100
  • Features: 83 /100
  • Value: 96 /100

Highlighted Features:

  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap.
  • DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port.
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
7

JET-Asian JCS-10 Model 10" Cabinet Table Saw Operator's & Parts Manual

JET-Asian JCS-10 Model 10' Cabinet Table Saw Operator's & Parts Manual

Editorial Scoring Index

  • Quality: 75 /100
  • Performance: 78 /100
  • Features: 88 /100
  • Value: 93 /100

Highlighted Features:

  • Misc. (Author)
  • English (Publication Language)
  • 10/03/2022 (Publication Date)
8

Grizzly Industrial G0899-10" Hybrid Table Saw

Grizzly Industrial G0899-10' Hybrid Table Saw

Editorial Scoring Index

  • Quality: 81 /100
  • Performance: 91 /100
  • Features: 99 /100
  • Value: 82 /100

Highlighted Features:

9

JET 10-Inch Deluxe XACTA Saw, 50-Inch Rip, 3HP, 1Ph 230V (708675PK)

JET 10-Inch Deluxe XACTA Saw, 50-Inch Rip, 3HP, 1Ph 230V (708675PK)

Editorial Scoring Index

  • Quality: 82 /100
  • Performance: 89 /100
  • Features: 86 /100
  • Value: 78 /100

Highlighted Features:

  • QUICK-RELEASE RIVING KNIFE: Hassle-free riving knife changes
  • POLY-V DRIVE BELT SYSTEM: Delivers efficient, quiet operation
  • PUSH-BUTTON ARBOR LOCK: For rapid blade change
  • SHROUDED BLADE AND 4" DUST COLLECTION PORT: Increases dust collection efficiency
  • JET RED ASSURANCE GUARANTEE: Backed by JET's industry-leading five-year warranty
  • CSA/CUS CERTIFIED: This saw follows strict guidelines and electrical requirements
10

JET JPS-10 ProShop II 10-Inch Table Saw with Steel Wings, 30-Inch Rip, 1-3/4HP, 1Ph 115V (725004K)

JET JPS-10 ProShop II 10-Inch Table Saw with Steel Wings, 30-Inch Rip, 1-3/4HP, 1Ph 115V (725004K)

Editorial Scoring Index

  • Quality: 87 /100
  • Performance: 89 /100
  • Features: 94 /100
  • Value: 95 /100

Highlighted Features:

  • NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
  • QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
  • IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
  • CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
  • CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

Last update on 2022-10-02 / Affiliate links / Images from Amazon Product Advertising API

Best Cabinet Table Saws Comparison Table

# Product Name Performance Popularity Value Our Rating
1 GENERAL INTERNATIONAL Automated Tablesaw - 3 HP 1 PH Automatic Bench Saw with 52" Rail Set & Large...
9.1
9.6
9.1
2 Powermatic PM1000, 10-Inch Table Saw, 52-Inch Rip, 1-3/4HP, 115/230V 1PH (1791001K)
9.6
9.2
8.9
3 Grizzly Industrial G0651-10" 3 HP 220V Heavy Duty Cabinet Table Saw
9.2
9.3
9.2
4 F2 Fusion Tablesaw
9.8
9.2
9.7
5 SAWSTOP 10-Inch Professional Cabinet Saw, 3-HP, 36-Inch Professional TGlide Fence System...
9.7
8.9
9.6
6 SAWSTOP 10-Inch Professional Cabinet Saw, 1.75-HP, 52-Inch Professional TGlide Fence System...
9.8
9.6
9.7
7 JET-Asian JCS-10 Model 10" Cabinet Table Saw Operator's & Parts Manual
9.5
8.9
8.8
8 Grizzly Industrial G0899-10" Hybrid Table Saw
8.9
9.6
8.8
9 JET 10-Inch Deluxe XACTA Saw, 50-Inch Rip, 3HP, 1Ph 230V (708675PK)
8.9
9.3
9.3
10 JET JPS-10 ProShop II 10-Inch Table Saw with Steel Wings, 30-Inch Rip, 1-3/4HP, 1Ph 115V (725004K)
8.9
9.7
9.3

Last update on 2022-10-02 / Affiliate links / Images from Amazon Product Advertising API

We hope you enjoyed our listing of the Best Cabinet Table Saws and have already found your desired product. If you think we’ve missed any specific model, feel free to let us know by dropping a comment below.

Leave a Comment